|
| Author |
Message |
cobalt.rednitaj
Joined: 21 Mar 2009
Posts: 14
|
 Posted: Tue Mar 24, 2009 12:03 pm Post subject: washer problem |
 |
|
| I have a honda pressure washer with a general pump. The problem i'm having is with a tremendous amount of pressure build up, which causes my motor to strain and mostly cut off. Now, this only occurs with my wand attatched to the hose. first, I thought maybe my unloader was bad, but I don't think thats the problem...... |
|
| Back to top |
|
 |
Midwestpro
Site Admin
Joined: 08 Oct 2007
Posts: 862
Location: Indiana
|
| Posted: Tue Mar 24, 2009 1:03 pm Post subject: |
|
|
The unloader would be my first guess. Sometimes they just stick, try turning the knob. It should go plus or minus, take it in the opposite direction and try to work it loose.
Also check to make sure the bypass hose is not plugged. If not and you can't get the unloader to work I would replace the unloader or take it to a shop to have them look at it. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
